Need help?Do you have a question about the Huawei SUN2000-20KTL and is the answer not in the manual?
General| Max. efficiency | 98.6% |
|---|---|
| Rated AC output power | 20, 000 W |
| Max. apparent power | 22, 000 VA |
| No. of MPP trackers | 2 |
| Max. input voltage | 1100 V |
| Protection degree | IP65 |
| Max. DC Power | 30, 000 W |
| Start Voltage | 200 V |
| Nominal DC Voltage | 600 V |
| Max. Input Current per MPPT | 26 A |
| Nominal AC Grid Frequency | 50 Hz / 60 Hz |
| Adjustable Power Factor Range | 0.8 leading to 0.8 lagging |
| Total Harmonic Distortion (THD) | <3% |
| DC Reverse-Polarity Protection | Yes |
| AC Overcurrent Protection | Yes |
| AC Short-Circuit Protection | Yes |
| DC Insulation Resistance Detection | Yes |
| Residual Current Monitoring | Yes |
| AC Overvoltage Protection | Yes |
| DC Switch | Yes |
| Cooling Method | Natural Convection |
| AC output voltage | 220 V / 380 V, 230 V / 400 V |
| MPPT operating voltage range | 200 V - 1000 V |
| Operating temperature range | -25°C to +60°C |
| Relative Humidity | 0% - 100% |
| Operating Altitude | Up to 4000 m |
| Surge Protection | Type II DC & AC |
To Next Page
