N
o.
Parameter Description Remark
s
4 PV string N
access type
NOTE
N
is the DC input
terminal number
of the inverter.
Set this parameter based on the type of the
PV string connected to DC input terminal
N
of the inverter. Currently, the options are as
follows: Automatic identication (default
value), Disconnection, Single PV string,
and 2 in 1.
You are advised to retain the default value.
If the value is incorrectly set, the PV string
access type may be incorrectly
identied
and alarms may be generated by mistake
for the PV string connection status.
SUN2000-(196KTL-H0, 200KTL-H2, 215KTL-H0)
Series
User Manual B String Access Detection
Issue 07 (2021-07-08) Copyright © Huawei Technologies Co., Ltd. 112
To Next Page
Loading...
Need help?
General