Huawei TE30 - Page 5

HUAWEI TE30 Videoconferencing Endpoint
Quick Start Guide
Configuring the TE30
Issue 03 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5

Configuring the TE30
When powered on for the first time,
your TE30 prompts you to select a
language. After you select a language,
the screen to the left is displayed for
you to set the general parameters.
If you set NMS server, Connection
type, Local IP address, Subnet mask, and
Gateway address, the TE30 automatically
attempts to obtain the configuration of the
network management system (NMS) server.
After the TE30 obtains the configuration, it
displays the conferencing screen.
Parameter
Description
Setting
NMS server
IP address of the HUAWEI
SMC 2.0.
Contact the local reseller or
operator.
Connection
type
Mode for obtaining an IP
address.

Static IP: The network
administrator assigns an
IP address to your TE30.
If you select this option,
you must also set Local
IP address, Subnet
mask, and Gateway
address.

Dynamic IP: When a
DHCP server is available
on the network, your
TE30 automatically
obtains an IP address
using the Dynamic Host
Configuration Protocol
(DHCP).
The default value is Static IP.
If you have set NMS server,
select Static IP for this
parameter.