Huawei TE30 Quick Start Guide

Configuring the TE30
HUAWEI TE30 Videoconferencing Endpoint
Quick Start Guide
8
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2013-03-27)
Parameter
Description
Setting
Password
Password used by the TE30 to
register with the GK. The GK
uses the password to
authenticate your TE30.
Obtain the password from
your network service
provider.
Ensure that this password
is the same as that
predefined on the GK.
Huawei GK
Whether to enable the Huawei
GK.
If the Huawei GK is disabled,
some functions, such as
Conference Control, are
unavailable on the TE30.
By default, this option is
deselected.
Deselect this option if your
TE30 is interoperating with
endpoints of other
suppliers.
Setting SIP Parameters
Click Next. On the screen shown to
the left, set SIP parameters.
Parameter
Description
Setting
Register
with server
Whether to register with the SIP
server.

If you select this option, the
TE30 will register with the
SIP server. After the TE30
successfully registers with the
SIP server, it can call
endpoints defined in the
address book by their IP
addresses, numbers, and
By default, this option is
deselected.

Huawei TE30 Specifications

General

Brand	Huawei
Model	TE30
Category	Conference System
Language	English