HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Procedure
Step 1 Connect the endpoint to a microphone and a stereo acoustic system.
During a conference, move the microphone only when required. Otherwise, the quality of the stereo
audio heard by remote sites is affected.
Step 2 Choose Advanced > Settings > Audio > Audio Input. Select audio input sources.
All available audio input sources are selected by default.
When the VPM220 is connected to the HD-AI port on the endpoint, you do not need to set the
stereo parameter, as the VPM220 works in dual-audio-channel mode.
Step 3 Select Save to return to the Settings screen.
Step 4 On the Settings screen, choose Conference > Advanced Settings and set Audio protocol to
AAC_LD or HWA-LD. Then, set Audio channels to Two.
----End
To Next Page
Loading...
