Huawei U-SYS IAD208E - Installing Hardware

User Manual
U-SYS IAD208E(M) Integrated Access Device Chapter 2 Installing Hardware
Huawei Technologies Proprietary
2-4
Table 2-3 List of tools and meters
Tools &
Meters
Description
Fastening
tools
Cross screwdriver M3
Universal
tools
Fitter tools
Sharp-nose pliers, diagonal pliers,
pliers
Special
tools
cable peeler, crimping pliers, and wire punch-down
tool
Meters
Multimeters, 500 V megaohm meters (for measuring
the insulation resistance)


 Note:
 The supplier should provide the list of tools and meters, and decide
the provider of the tools and meters together with the customer.
 The meters must be calibrated and proved to be qualified before
they can be used.
2.2 Installing Hardware
IAD208E(M) is a box-like device with fixed configuration.
Installation on site is very simple, and the main installation steps are
connections of cables, as shown in Table 2-4.