Huawei UPS2000-A-2KTTS

Display Setting
Enable or disable the buzzer o
function:
ENA: The buzzer is muted.
DIS: The buzzer is unmuted (default).
● Automatic startup setting
Display Setting
Automatic startup upon power-on:
ENA: The function of automatic
startup upon power-on is enabled.
DIS: The function of automatic startup
upon power-on is disabled (default).
NO TICE
The DHCP function setting, IP address display, subnet mask display, and gateway
display are available only when an SNMP card is congured. If no SNMP card is
connected, default values are displayed for the IP address, subnet mask, and
gateway. If an SNMP card is connected, the IP address, subnet mask, and gateway
need to be set on the WebUI of the SNMP card.
● DHCP function setting
Display
Remarks
Set the address allocation mode:
ENA: enabled
DIS: disabled (default)
UPS2000-A-(1 kVA-3 kVA)
User Manual 5 Setting Control Panel
Issue 17 (2024-01-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 56