Huawei UPS2000-G-10KRTL User Manual

Figure 4-33 Self-Load screen
Table 4-23 Self-load settings
Item Description Defa
ult
Value
Value
Range
Output
power
ratio
This parameter is used only during the
tests before shipment. This parameter is
congurable only after the inverter is
shut down.
80% 20%–
100%
Self-load
mode
This parameter is used only during the
tests before shipment. This parameter is
congurable only after the inverter is
shut down.
Disabl
ed
Disabled,
Enabled
● Others screen
Figure 4-34 Others screen
NO TE
The EPO enable setting is available only for the UPS2000-G-15KRTL-01/UPS2000-
G-20KRTL-01. EPO is enabled for the UPS2000-G-6KRTS/UPS2000-G-10KRTS/
UPS2000-G-15KRTL/UPS2000-G-20KRTL by default.
UPS2000-G- (6 kVA-20 kVA)
User Manual 4 Control Panel
Issue 18 (2021-07-16) Copyright © Huawei Technologies Co., Ltd. 67

Huawei UPS2000-G-10KRTL Specifications

General

Brand	Huawei
Model	UPS2000-G-10KRTL
Category	UPS
Language	English