Huawei UPS2000-G-2KRTL - Personnel Requirements; Electrical Safety

UPS2000-G-(1 kVA-3 kVA)
User Manual
1 Safety Information
Issue 15 (2019-12-19)
Copyright © Huawei Technologies Co., Ltd.
4

Do not power on the equipment before it is installed or confirmed by professionals.
1.2 Personnel Requirements

Personnel who plan to install or maintain Huawei equipment must receive thorough
training, understand all necessary safety precautions, and be able to correctly perform all
operations.

Only qualified professionals or trained personnel are allowed to install, operate, and
maintain the equipment.

Only qualified professionals are allowed to remove safety facilities and inspect the
equipment.

Personnel who will operate the equipment, including operators, trained personnel, and
professionals, should possess the local national required qualifications in special
operations such as high-voltage operations, working at heights, and operations of special
equipment.

Professionals: personnel who are trained or experienced in equipment operations and are
clear of the sources and degree of various potential hazards in equipment installation,
operation, maintenance

Trained personnel: personnel who are technically trained, have required experience, are
aware of possible hazards on themselves in certain operations, and are able to take
protective measures to minimize the hazards on themselves and other people

Operators: operation personnel who may come in contact with the equipment, except
trained personnel and professionals

Only professionals or authorized personnel are allowed to replace the equipment or
components (including software).
1.3 Electrical Safety
Grounding

For the equipment that needs to be grounded, install the ground cable first when
installing the equipment and remove the ground cable last when removing the
equipment.

Do not damage the ground conductor.

Do not operate the equipment in the absence of a properly installed ground conductor.

Ensure that the equipment is connected permanently to the protective ground. Before
operating the equipment, check its electrical connection to ensure that it is securely
grounded.
General Requirements
Use dedicated insulated tools when performing high-voltage operations.
AC and DC Power