Huawei UPS2000-G-2KRTL User Manual

UPS2000-G-(1 kVA-3 kVA)
User Manual
4 Setting Control Panel
Issue 15 (2019-12-19)
Copyright © Huawei Technologies Co., Ltd.
41

Set the automatic startup function.
Display
Setting
Enable or disable the automatic startup
function.
ENA: Enables the automatic startup
function.
DIS: Disables the automatic startup function
(default value).
The DHCP function setting, IP address display, subnet mask display, and gateway display are
available only when an SNMP card is configured. If no SNMP card is connected, default
values are displayed for the IP address, subnet mask, and gateway. If an SNMP card is
connected, the IP address, subnet mask, and gateway need to be set on the WebUI of the
SNMP card.

DHCP function setting
Display
Remarks
Address allocation mode setting:
ENA: enabled
DIS: disabled (default value)

IP address display
Display
Remarks
UPS IP address: can only be displayed but
not configurable. Press ▲ or ▼ to switch
between different screens. On the ESC
screen, press OFF/ENTER to exit. (The
default value is 192.168.0.10.)

Subnet mask display

Huawei UPS2000-G-2KRTL Specifications

General

Brand	Huawei
Model	UPS2000-G-2KRTL
Category	UPS
Language	English