Huawei UPS2000-H-6KRTL-L - 6.2.1.3 Starting the Inverter

Step 2 Tap OK. The app home screen is displayed.
----End
6.2.1.3 Starting the Inverter
Prerequisites
1. The UPS has been powered on.
2. You have installed and logged in to the app.
Procedure
Step 1 If the alarm indicator on the UPS panel is blinking, view the alarm details on the
app and handle the alarm.
Step 2 Choose Cong > Quick Settings.
● Set the voltage level and frequency level based on site requirements.
● Set the battery type, single battery voltage, number of batteries in a battery
string, single battery capacity, and number of battery strings based on site
requirements.
UPS2000-H-(6 kVA-10 kVA)
User Manual 6 Power-On Commissioning
Issue 03 (2023-08-20) Copyright © Huawei Digital Power Technologies Co., Ltd. 103