Huawei V100R001 - Alarm Beacon

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
99
Indicat
or
Col
or
Name
Status
Description
n
indicator
Blinking
WPS matching mode. If the
matching fails, the WPS indicator
turns off after blinking for 2
minutes. If the matching is
successful, the WPS indicator turns
off.
3.4.15 Alarm Beacon
The alarm beacon is installed at the periphery of the aisle containment. When a fire occurs or
smokes are generated in the micro-modular equipment room, the alarm beacon generates an
audible signal and flashes to inform operators of fire and security risks.
Figure 3-69 shows an alarm beacon.
Figure 3-69 Alarm beacon
Table 3-67 lists the structural specifications of an alarm beacon.
Table 3-67 Structural specifications of an alarm beacon
Item
Specifications
Dimensions (L x W x H)
130 mm x 75 mm x 55 mm
Installation requirements
Installed on a wall
Protection level
IP50
Environmental
requirements
RoHS, Reach
MTBF
≥ 100,000 hours
Table 3-68lists the technical specifications of an alarm beacon.