Huawei WiFi AX3 Pro User Manual

HUAWEI WiFi AX3 Pro
Product Description
Error! Use the Home tab to apply 标题 1,heading 1 to
the text that you want to appear here.Error! Use the
Home tab to apply 标题 1,heading 1 to the text that
you want to appear here.
Draft_01 (2021-12-16)
Huawei Proprietary and Confidential
Copyright © Huawei Device Co., Ltd.
4
1.3 Indicator
Figure 1-3 Indicator
Table 1-2 Indicator and ports
Router Status
Indicator Status
Description
Powering on
Steady red
The router is starting up.
Connecting to
the Internet
Steady green
The router is connected to the Internet.
Steady red
The router is not connected to the
Internet.
Connecting
through NFC
Flashing green for three times
A phone has tapped the NFC label on
the router to connect to the Wi-Fi.
NOTE
The phone must be an Android phone with
NFC enabled.
HarmonyOS
Connect
Slowly flashing
The router has discovered a device that
supports HarmonyOS Connect. For
example, another HUAWEI router.
Quickly flashing
The router is pairing with the device
that supports HarmonyOS Connect or
WPS.
Quickly flashing and turning
to steady green or red
HarmonyOS Connect or WPS pairing
is successful.
Steady green: the router is connected to
the Internet.
Steady red: the router is not connected
to the Internet.
Slowly flashing
HarmonyOS Connect or WPS failed.
The router rediscovered the device.

Huawei WiFi AX3 Pro Specifications

General

Wi-Fi Standard	Wi-Fi 6 (802.11ax)
RAM	256 MB
ROM	128 MB
Dimensions	225 mm x 159.2 mm x 39.7 mm
Operating Temperature	0°C to 40°C
Operating Humidity	5% to 95% (non-condensing)
Huawei Share	Yes
NFC	Yes
Frequency Bands	2.4 GHz, 5 GHz
Processor	Gigahome Quad-core 1.4 GHz CPU
Antennas	4 external antennas
Ports	1 WAN port, 3 LAN ports
Security	WPA3, Firewall
Features	Huawei Share, Parental Control, VPN, Guest Wi-Fi, IPv6, Beamforming, OFDMA, 1024-QAM, MU-MIMO
Weight	403 g
Power Supply	12 V/1 A
Maximum Speed	3000 Mbps (574 Mbps on 2.4 GHz + 2402 Mbps on 5 GHz)