10
Using of Smart Sensor
5.2 Device Placement
1. Place the sensor on the smallest part of your child’s ankle just above
the ankle bone. The sensor must be facing the outside of the ankle (as
shown in the picture below). Use the Velcro on the straps to secure the
device in place.
2. To avoid discomfort, red marks, pressure sores or blister due to
incorrect use, ensure the device is tted snugly but not wrapped too
tight. Different strap lengths are available for different leg widths for
maximum comfort.
3. The operation distance between the wearable sensor and base station
works best between 6-9 feet (2-3m).
Wearing a sock can
improve wearable
contacts on skin
To Next Page
Loading...
