Huffy Slider User Manual

14
A
C
D
B
WARNING: You must adjust the front brakes before you ride the bicycle.
Step One: Put the brake shoes (B) in the correct position:
 Loosen the Screw (A) of each Brake Shoe (B).
 Adjust each Brake Shoe so it is fl at against the rim and aligned with the curve of
the rim.
 Make sure each Brake Shoe does not rub the tire.
 If the surface of the Brake Shoe has arrows, make sure the arrows point toward
the rear of the bicycle.
 Hold each Brake Shoe in position and tighten the Screw.
Step Two: Test the tightness of each Brake Shoe:
 Try to move each Brake Shoe out of position.
 If a Brake Shoe moves, do Step 1 again, but tighten the nut tighter than before.
 Do this test again, until each Brake Shoe does not move.
Brake Setup - continued
• Assembly

Huffy Slider Specifications

General

Brand	Huffy
Model	Slider
Category	Bicycle
Language	English