Need help?Do you have a question about the Hughes & Kettner Duotone and is the answer not in the manual?
Describes the distinct tonal characteristics of the Overdrive and Clean channels.
Guitar input, Clean Volume, and EQ sections for both channels.
Overdrive Gain, Boost, and FX Level controls for tone shaping and effects.
Channel select, Master volumes, Power, Standby, and status LED.
Location for mains power connection and anode fuses.
FX loop, send/return, footswitch, and speaker outputs.
Selecting channels and activating the Boost function.
Using Master volumes and managing effects via the FX Level control.
Signs of tube wear indicating replacement is needed.
Procedures and precautions for replacing tubes.
Tips for maximizing tube lifespan and amp performance.
Essential precautions for amp care and safe operation.
Diagnosing and resolving power-up failures or lack of audio output.
Addressing muddy or washed-out sound when using effects.
Detailed specifications for preamp and power amp sections.
Includes input power, consumption, fuses, temperature, dimensions, and weight.
Suggested control settings for guitars with single coil pickups.
Suggested control settings for guitars with humbucker pickups.
Crucial safety precautions and warnings for operating the unit.
Guidelines for connecting power and placing the amplifier safely.
Certification of compliance with European EMC and low voltage directives.
Contact details for general inquiries and international support.
General| Channels | 2 |
|---|---|
| Speaker Configuration | 1x12" |
| Weight | 24 kg |
| Dimensions | 575 x 490 x 275 mm |
| Effects | Reverb |
| Tubes (Preamp) | 3x 12AX7 |
| EQ | 3-band (Bass, Middle, Treble) |
| Speaker Output | 1x 8 Ohm, 1x 16 Ohm |
To Next Page