Remove hardware box and set aside
5.1 UNPACKING THE T7
*For safety reasons, two people
are required to remove the T7
from the pallet
5.0 UNPACKING AND PREASSEMBLY
The T7 Point-of-Care Technology Cart should arrive upright inside a cardboard
carton strapped with two plastic straps. Inside the main carton is a smaller
cardboard container storing all standard and optional hardware. The entire
outer packaging should be plastic shrink-wrapped. Removal of the T7 from
the packaging must proceed as follows to avoid damage and the possibility
of lost parts.
34
Return to Table of Contents
To Next Page
Loading...
