Humanware SmartView 360 User Manual

2
 User Guide
 Getting Started Guide
 Carry case (optional)
1.3 Setup
Figure 2: Use built-in handle to lift out of box
1. Lift Base unit from the box by holding the built-in
handle. IMPORTANT, do not lift by holding the
arm.
2. Place the SmartView 360 on a flat and level
surface.
3. Connect the Control panel to the unit.
4. Connect the power cable to the unit and then
connect it to an outlet.
5. Turn on SmartView 360 to verify connectivity.

Humanware SmartView 360 Specifications

General

Brand	Humanware
Model	SmartView 360
Category	Magnifiers
Language	English