Humanware SmartView 360 - Troubleshooting: Low Brightness and Glare

22
If the contrast is low:
 Check the Contrast setting in the menu. The
contrast can only be adjusted in Color mode.
If the brightness is low:
 Check the Brightness. Use the Brightness knob to
make adjustments. Remember that there are
different settings for Color and Enhanced contrast
modes.
 Check if you have sufficient ambient light.
If there is a lot of glare:
 Reduce the Brightness.
 Reduce the external lighting effects.
 Tilt object in a different direction to reduce glare.
If there is a limited number of false colors:
 Press the Enhanced contrast button to make sure
that the SmartView 360 is in Enhanced contrast
mode.
 Press and hold the Enhanced contrast button for
five seconds until you hear a beep.