Second Row Seats
The split bench, and bucket seats can be folded to
provide more cargo space.
To fold the rear seat:
1. Make sure that nothing is under or in front of
the seat.
2. Pull up on the strap
loop located at the rear
of the seat cushion and
pull the seat cushion
up and fold it forward.
3. Pull the seatback forward and fold it down until it
is flat.
4. Repeat the steps for the other half of the split
bench seat.
For more information, see Split Folding Rear Seat
on
page 2‑10
.
Third Row Seats
If the vehicle has a third row seat, it is intended for two
passengers and has only two designated seating
positions.
The third row seatback can be folded and the entire
seat can be tilted or removed from the vehicle.
See, Third Row Seat
on page 2‑14
for more
information.
Heated Seats
Front Seats
On vehicles with heated front seats, the control buttons
are located on the driver and passenger doors.
I : Press to turn on the heated seatback.
J : Press to turn on the heated seat and seatback.
The light on the button will come on to indicate that the
feature is working.
Press the button to cycle through the temperature
settings of high, medium, and low, and to turn it off.
Indicator bars next to the symbol will designate the level
of heat selected: three for high, two for medium, and
one for low.
For more information, see Heated Seats on page 2‑6.
1-10
To Next Page
Loading...
Need help?
General
