Need help?Do you have a question about the Humminbird 150SX and is the answer not in the manual?
General| Display Size | 4 inches |
|---|---|
| Display Type | FSTN LCD |
| Max Depth | 600 feet |
| Transducer Type | Single Beam |
| Frequency | 200 kHz |
| Power Output | 100 Watts (RMS) |
| Operating Frequency | 200 kHz |
| Power Output (Peak to Peak) | 800 Watts |
| Depth Capability | 600 feet |
| Beam Angle | 20 degrees |
| Operating Voltage | 10-20 VDC |
| Waterproof Rating | IPX7 |
| Sonar Coverage | 20 degrees @ -10 dB |
Lists included parts and optional accessories for the Humminbird 150SX fishfinder.
Explains the two primary components for installation: the control head and the transducer.
Details transom and inside-hull mounting methods for the transducer.
Covers options like portable and trolling motor mounting, and alternative transducer types.
Describes transducer exchange options and tools needed for initial installation.
Explains the basic principles of sonar technology and how the fishfinder uses sound waves.
Guides users on how to activate and use the built-in simulator for learning.
Describes the display elements, including depth, depth range, and bottom representation.
Explains how to read bottom composition, structure, surface clutter, and other visual indicators.
Introduces the unit's keypad and basic functions like Power and Fish ID.
Details control of display backlight and navigation through menus using buttons.
Explains menu layout, options, and how to adjust settings like Sensitivity.
Covers how to adjust the vertical display range for optimal bottom depiction.
Explains how to use zoom features to enlarge specific areas of the water column.
Details the Depth Alarm feature to warn of shallow water conditions.
Explains how to configure the fish alarm to alert for detected fish symbols.
Covers adjusting display contrast and the rate of graphic information updates.
Describes the low voltage warning system and how to set the alarm threshold.
Explains display options for bottom blackening and detailed Fish ID functionality.
Covers adjusting numeral display size and selecting measurement units (feet/meters).
Details accessing the diagnostic feature and selecting display languages.
Explains depth offset for accurate readings and how to reset unit settings to factory defaults.
Explains self-test, transducer connection, voltage input, and total time diagnostics for troubleshooting.
Provides instructions for cleaning and caring for the fishfinder unit and transducer.
Offers solutions for common problems such as unit not turning on or no transducer detection.
Outlines the one-year limited warranty and provides customer support contact information.
To Next Page