Humminbird CoastMaster - Getting Started with CoastMaster; Power On and Startup Modes; Check and Update Software Versions; Update Basemap for HELIX Units

2
 
P O
1. Press the POWER key.
2. Choose your startup mode. If you are on the water with GPS
reception, select Normal mode. If you are off the water without GPS
reception, select Simulator mode.
C  C S V
It is important to install the latest software update to enable the
Humminbird CoastMaster chart card on your control head.
CoastMaster requires the following software versions:
APEX and SOLIX: 4.020 and later
HELIX: 2.660 and later
To download the latest software, go to our Web site at humminbird.com
and slick Support > Software updates. For complete details about the
software update process, see your control head manual.
U  B (HELIX O)
CoastMaster requires the following basemap versions to operate on
HELIX control heads:
HELIX 7 and 8: 2.010 (released 07/2020) and later
All other compatible HELIX models: 1.031 (released 07/2020) and later
To download the latest software, go to our Web site at humminbird.com
and slick Support > Software updates. For complete details about the
software update process, see your control head manual.
O C V
APEX/SOLIX:
1. Press the HOME key.
2. Select Chart View from the Favorites bar.
HELIX:
1. Press the VIEW key until Chart View is displayed on-screen.
OR
Press and hold the VIEW key to open the Views X-Press Menu. Select
Chart > Chart View.