Need help?Do you have a question about the Humminbird HDR 200 and is the answer not in the manual?
General| Cable Length | 20 feet |
|---|---|
| Power Output | 500 Watts (RMS) |
| Transducer Type | Transom Mount |
| Compatibility | Select Humminbird fish finders |
| Frequency | 200 kHz |
Details various transducer mounting methods, including transom and hull installations.
Step-by-step guide for installing the transducer on a boat's transom.
Instructions for assembling the transducer pivot and setting its angle.
Covers checking transducer position and installing cable clamps.
Important warnings and considerations for mounting the transducer inside the hull.
Details alternative methods for mounting the LCR unit itself.
Guide to connecting power and transducer cables to the LCR unit.
Pre-installation checks and preparation for mounting the HDR 200 unit.
Instructions for correctly wiring the HDR 200 unit to the boat's power source.
How to activate, set, and use the depth alarm feature of the HDR 200.
To Next Page