68
Sonar (2D)
R S H
Press any arrow on the Cursor Control key, and the sonar history will freeze and the cursor will display on-screen. If you move the
cursor over a sonar return, digital readouts for the cursor position are displayed on the view. The RTS Window continues to update
at the fastest rate possible for depth conditions (see Customize the Sonar View).
Freeze the Sonar History
1. Press any arrow on the Cursor Control key.
2. Move the cursor over a sonar return.
NOTE: To mark a waypoint or start navigation to the cursor position, see Navigation in Sonar Views.
Move the Cursor
Reviewing the Depth of the Cursor Position
cursor
digital
readouts
RTS Window
cursor
cursor depth depth below cursor distance to cursor position bearing to cursor position
To Next Page
Loading...
General
