EasyManua.ls Logo

Hunter 30776 - Air Purifier Maintenance; Cleaning Your Air Purifier; Cleaning the Pre-Filters & Changing the Carbon Odor Filter

Hunter 30776
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42934-01 10
Air Purier Maintenance
Cleaning Your Air Purier
Proper maintenance of your Hunter Air Purier will help ensure years of trouble free
service.
Follow these steps to properly maintain your Air Purier:
1. Approximately every 90 days, the outside of the unit should be cleaned with a soft,
damp cloth.
2. If needed, the Front Grill can be removed from the unit and cleaned with soapy water.
NOTE: Remove the Carbon Odor Filter before exposing the Front Grill to water.
3. Follow the instructions in Cleaning the Pre-Filters and Changing the Carbon Odor
Filter (pg. 10) and Changing the HEPAtech
®
Main Filter (pg. 11) to determine when
and how to replace the lters.
NOTES:
The Air Purier must be unplugged during the cleaning process.
Be sure the unit is completely dry before plugging in and using.
Never immerse unit in water.
Cleaning the Pre-Filters and Changing the Carbon Odor Filter
When the Pre-Filter exceeds 1400 hours (refer to Filter Life Counters for additional infor-
mation, pg. 8), the Pre-Filter indicator will turn on as a reminder that you should clean the
Pre-Filter and change the Carbon Odor Filter. To maintain proper odor-removing capability
and overall ltration performance, the pre-lter should be cleaned and the carbon odor
lter replaced every 1400 hours (approximately 3 months of use). If necessary, clean the
pre-lter and change the odor lter more often. Proper maintenance of the pre-lter will
help extend the life of the HEPAtech
®
lter. Refer to Obtaining Replacement Filters (pg. 13)
if you need help nding replacement lters.
To clean the Pre-Filters, Change the Carbon Odor Filter, and reset the Pre-Filters & Carbon
Odor Filter Life Counter:
1. First, turn o and unplug the Air Purier.
2. Next, remove the front grill. Refer to Figs. 4 and 5 (pg. 6).
3. Remove the Pre-Filters (ref. Fig.2, pg. 4) and use a vacuum cleaner to remove
dust from them. Then, reinsert the Pre-Filters into the Air Purier.
5. The Carbon Odor Filter is held to the back of the Front Grill with four hook-
and-pile fasteners. Peel o the old Carbon Odor Filter and gently press a new
lter into place .
6. If needed, use a soft damp cloth to wipe o the Front Grill.

Related product manuals