Hunter 30776 - Filter Life Counters; Resetting the Air Purifier

42934-01 8
Operation
Filter Life Counters
The Pre-Filters, Carbon Odor Filter, and HEPAtech
®
Main Filter are critical to the proper
operation of the Air Purier. To help you know when to clean and change the lters, your
Hunter Air Purier has Filter Life Counters that will monitor the life of your lter. Although
the exact life of the lters depends on the environment, the table below gives typical us-
age times of the lters.
Table 2: Typical Usage Times of the Filters
Filter Type Typical Usage
HEPAtech
®
Main Filter
2800 hours
When the Pre-Filters & Carbon Odor Filter Indicator comes on, clean the Pre-Filters and
change the Carbon Odor Filter. Replace the HEPAtech
®
Main Filter when the HEPAtech
®
Main Filter Indicator comes on.
The values of the Filter Life Counters are stored in the Air Purier’s memory. The unit may be
unplugged and moved or stored without losing the Pre-Filter and Filter Counter values.
To properly track lter life, reset the Filter Life Counters each time the lters are changed
or cleaned. Refer to Pre-Filters & Carbon Odor Filter (pg. 10) or Changing the Filter (pg. 11)
sections for instructions on how to reset the counters.
Resetting the Air Purier
In the unusual situation that the unit or the display is exhibiting erratic behavior, you may
want to reset the Air Purier. If you still have problems after resetting the Air Purier, please
contact Hunter for additional assistance (refer to Technical Support, pg. 14).
To Reset the Air Purier:
1. Unplug the unit for at least 30 seconds.
2. Plug the unit back in.
Pre-Filter / Carbon Odor Filter
1400 Hours