7 42934-01
Operation
4. If the lter is secure, place the front grill back onto the unit. Place the grill over
the front of the Air Purier and lower it into position. Refer to Fig. 6. NOTE:
This unit will not operate unless the grill is in the correct position. If the lter
is not secure, refer to the section Changing the HEPAtech
®
Main Filter (pg.
14).
Fig. 8
Fig. 7
5. Plug the unit into a 120V electrical outlet and turn the Speed Knob. The
Air Purier will start with a low blower speed and the blue LED will come
on. Use the Speed Knob to adjust the blower speed to the desired level (O,
Sleep, Active, Turbo Clean). Refer to Fig. 8.
OFF SLEEP ACTIVE TURBO CLEAN
BLUE LED
SPEED KNOB