©2010 Hunter Fan Company
29
Operation
3
Error Mode
If the thermostat is unable to control your system due to an
unexpected battery problem, the thermostat will enter Error
Mode. In this condition, the thermostat ashes “Er” on the LCD
display, and shuts off your system.
To correct this problem, replace the batteries with 2 new AA alkaline batteries,
even if you have recently replaced them. Next, use a paper clip to press the
RESET button next to the keypad. You will need to reprogram your thermostat and
conrm normal operation.
If Error Mode returns, please call Technical Support at 1-888-830-1326 for
further information.
To Next Page
Loading...
