19
ATTACHING THE THERMOSTAT
1. Lift the thermostat cover and set the SYSTEM
to OFF and the FAN switch to AUTO.
2. Locate the HE/HG on the back of the
thermostat. Set the switch to HG (default) for gas
furnace and oil burners. Set the switch to HE for
electric furnaces.
(The switch has no effect when the system is set to cooling
mode.)
3. Locate the A R switch on the back of
the thermostat. If you wish to use the Energy Star
compliant Auto Recovery feature, verify that the
switch is in the ENABLE position. If you do not
wish to use this feature, simply change the switch
to the DISABLE position. See pages 44-45 for more
information.
INSTALLING THE THERMOSTAT, CONT.
To Next Page
Loading...
