35
METHODS OF OPERATION, CONT.
3. CREATING CUSTOM PROGRAMS
• Program times can be set in 10 minute increments.
• Program temperature can be set in increments of 1
o
F (1
o
C).
• After 15 seconds of inactivity during programming,
the thermostat will return to Normal Display mode.
• When setting the program time, note the AM/PM
indicator.
• Press Hold/Return at any time to exit Program mode.
• If no button is pressed for 5 seconds, the unit will
return to the Normal Display mode.
1. Slide the to HEAT or COOL to program
the corresponding system.
2. Press P to enter Program mode. (The LCD will
begin to ash)
To Next Page
Loading...
