Hunter 44110 - Troubleshooting Common Issues; Temperature Range and Compressor Protection; Resetting the Unit

48
49
1. Temperature Range
2. Compressor Protection
After the system stops running in cooling
mode, there will be a 3.5 minute delay
before it can be restarted to prevent
compressor damage due to rapid cycling.
3. Resetting the unit
To restore the thermostat to the original
factory settings, press the reset button
with a paperclip.
(This will erase any user-programmed settings.)
reset
Display Range
30
o
F
99
o
F
(0
o
C)
(37
o
C)
45
o
F
Program Range
95
o
F
(7
o
C)
(35
o
C)
Out of Range
"HI"
>
99
o
F
Out of Range
"LO"
<
30
o
F