25
The default for this thermostat setting is in a 12 hour
format. You can change the format to 24 hour format by
pressing D/T and then Program.
The AM/PM indicator will be off when the thermostat
is in 24 hour mode.
Setting day and time:
1. Press D/T. (AM/PM and current hour will ash)
2. Press U or D to adjust the setting.
3. Press D/T again to adjust the minute setting.
4. Press D/T again to adjust the day of the week.
5. Press D/T to return to the normal display.
You may also press Hold/Return at any time to return
to the normal display.
SETTINGS, CONT.
To Next Page
Loading...
