Hunter 44760 - Everyday Programming; PROGRAMMING (Continued)

28
28
PROGRAMMING
Everyday Programming
Step 1 ■ Slide Power Switch to ON.
■ Press to select HEAT or COOL to program the corresponding system.
(Auto may be selected, but does not affect the programming steps)
Step 2 ■ Press to enter program mode, display shows weekday programs.
■ Press 9 times to reach the Everyday program.
Step 3 ■ The Program hour and AM or PM indicator are flashing. Press to
change the hour.
on off em
system
program
prog-day
Everyday
System
AM
Fan
Temp
1 2 3 4
Thursday
System
AM
Fan
Te mp
2
or
41652_model44760_web.pmd
29
Step 4 ■ Press again to change the minute position. The current minute will
be flashing.
■ Press to change the minute.
Step 5 ■ Press again to change to the program temperature. The current tem-
perature will be flashing.
■ Press to change the temperature.
Step 6 ■ Press again to move the next program number.
■ Repeat Steps 3 through 5 to change the remaining programs.
■ Press at any time to exit the Program Mode.
■ After 15 seconds, the thermostat will return to Normal
mode automatically.
Step 7 ■ Change to the other system and repeat steps 2 through 6.
Everyday
System
AM
Fan
Temp
1 2 3 4
program
program
ret-clear
system
or
Everyday
System
AM
Fan
Temp
1 2 3 4
program
or