Hunter 80707 - New Construction: Suspended Between Joists (Continued); Motor Reinstallation and Securing; Power On and Testing

43053-01 - 09/12/2011
10
B24
B23
B25
B26
Reinstall the motor by inserting the tabs and pushing up into
position. Make sure the wires are not pinched between the
motor and the housing.
Turn on the power source.
Go to step E1 on page 18 to attach grill.
Secure the motor by tightening the 2 screws.
Test the motor. If the motor does not run, check the
plug connection.
E1
B27
B26
ON
OFF