Hunter 80707 - New Construction: Suspended Between Joists (Continued); Install Wiring Cover and Connect Ducting; Connect Motor Wiring

43053-01 - 09/12/2011
9
B17
B18
B21
B22
B20
Install the wiring cover plate. Make sure all wiring
connections are inside the box or under the wiring cover plate.
Install the wiring cover plate. Make sure all wiring connections
are inside the box or under the wiring cover plate..
Tighten screws.
Connect 4” duct and vent to the outside. Tape joints. If ducting
does not fit securely, an adapter may need to be purchased.
F1
Go to step F1 on page 20 to connect the wires as shown.
B19
Connect wiring from the motor to the wiring cover plate.