www.HunterFan.com
1.888.830.1326
Assembling the Top Housing
KEEP!
Remove the pre-installed
setscrew so that the downrod
can be inserted.
K
E
E
P
!
Install three upper motor cover
screws, found in the hardware
bag, and tighten them securely.
Upper Motor
Cover Screw
To assemble the housing to the
hanger adapter, align the three
raised tabs on the hanger adapter
with the three narrow notches in
the top housing. Make certain the
housing sits at on the adapter.
6
M3535-01 • 06/18/13 • © Hunter Fan Company
To Next Page
Loading...
