www.HunterFan.com
1.888.830.1326
15
M3535-01 • 06/18/13 • © Hunter Fan Company
Light Kit (continued)
Connect the 4 pin plug from the ballast to
the uorescent bulb.
4 Pin Plug
CONGRATULATIONS!
YOU’RE DONE!
See next page for fan
operation instructions.
Glass Globe
Trim Ring
Globe
Assembly
Screw
Place the glass globe into the globe trim
ring. Align the three holes in the trim
ring with the three holes in the light
kit. Install and securely tighten all three
globe assembly screws, found in the
hardware bag.
To Next Page
Loading...
