Hunter Claudette - Canopy and Blade Installation; Attaching Fan Blades

7
1886
1886
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Bulbs/Glass Pull Chains
Installing the Canopy
x2
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the hardware bag.
F
i
t
t
h
e
c
a
n
o
p
y
i
n
p
l
a
c
e
a
s
s
h
o
w
n
.
bag
Canopy Screw
Installing the Blades:
Repeat x5
x10
bag
Blade Screw
x10
bag
Blade Washer
Insert the blade into the blade slot around the
center screw. Put the blade washers found in
the hardware bag onto the blade screws
found in the hardware bag. Then install
the blade screws to secure each blade to
the fan.
Let the tool do the work!
A magnetic screwdriver will
give you more visibility when
securing the canopy.
Hunter Pro Tip: