Hunter e36 - Standing Rigging Etail (Layout)

Hunter e36 • Sails and Rigging
12.13
ITEM QTY FITTINGS
1 D3 2 9/32" 7 mm T-TERMINAL 308-325 14 ft. 6 1/2" 4430 mm
FORK 308-315-01
2 V2 2 9/32" 7 mm EYE 308-363 14 ft. 6 1/4" 4425 mm
EYE 308-363
3 D2 2 3/16" 5 mm STEMBALL 308-552 14 ft. 1/2" 4280 mm
CUP 306-572
CUP 306-573
STD/FORK TB 174-323-05
4 RD2 2 3/16" 5 mm FORK 308-313-01
13 ft. 10 1/4" 4225 mm
STD/T TB 174-473-21
5
V1 2 5/16" 8 mm FORK 308-316-01 15 ft. 9 1/2" 4810 mm
STD/TGLE TB 174-325-10
6
D1 2 5/16" 8 mm STEMBALL 308-555
15 ft 9 3/4" 4820 mm
STD/TGLE TB 174-325-10
7
RD1 2 3/16" 5 mm FORK 308-313-01
12 ft. 1" 3685 mm
STD/T TB 174-473-21
8 FORESTAY 1 9/32" 7 mm
HOOD UNIT 45 ft. 8 3/4" 13937 mm
OVERALL CP-CP
3. MEASURE T-TERMINALS & STEMBALLS FROM TOP OF FITTING
2. LENGTHS
DO NOT
INCLUDE SPREADER TIP LINKAGE.
1. CP = CENTER PIN; EOS = END OF STUD
HUNTER e36 CONVENTIONAL
STANDING RIGGING
SELDEN MAST SRIG-0109
CP-CP OR CP-EOSWIRE SIZE