Hunter e36 - Standing Rigging Etails (Specification)12.12

Hunter e36 • Sails and Rigging
12.14
ITEM QTY FITTINGS
1 D3 2 9/32" 7 mm T-TERMINAL 308-325 13ft. 11" 4255 mm
FORK 308-315-01
2 V2 2 5/16" 8 mm EYE 308-364 13ft. 10 1/2" 4230 mm
EYE 308-364
3 D2 2 3/16" 5 mm T-TERMINAL 308-323 12ft. 8 3/4" 3870 mm
STD/FORK TB 174-323-55
4 RD2 2 3/16" 5 mm FORK 308-313-01 13ft. 3" 4040 mm
STD/T TB 174-473-21
5 V1 2 5/16" 8 mm FORK 308-316-01 15ft. 6 1/4" 4730 mm
STD/TGLE TB 174-325-10
6 D1 2 5/16" 8 mm T-TERMINAL 308-326 14ft. 7" 4440 mm
STD/TGLE TB 174-326-09
7 RD1 2 3/16" 5 mm FORK 308-313-01 10ft. 8 1/4" 3255 mm
STD/TGLE TB 174-473-21
8 FORESTAY 1 9/32" 7 mm HOOD UNI
T 45ft. 8 3/4" 13900 mm
OVERALL CP-CP
3. MEASURE T-TERMINALS & STEMBALLS FROM TOP OF FITTING
1. CP = CENTER PIN; EOS = END OF STUD
2. LENGTHS DO NOT
INCLUDE SPREADER TIP LINKAGE.
HUNTER e36 FURL
STANDING RIGGING
SELDEN MAST SRIG-2762NMP
CP-CP OR CP-EOSWIRE SIZE