Hunter Energy Monitor AC 42205 - Personal Program Schedule Planning; Manual Temperature Override

Programming
Personal Program Schedule
2C-21
Before programming, use this Energy
Monitor Personal Program Schedule
to determine which times and
temperature settings will
best satisfy both your comfort and
energy saving requirements.
Use a pencil so you can revise your
records each time you change your
temperature settings, r
Beginning Program Date
WEEKDAYS
TIME
am/pm
rEMP.
PROGRAM 1
PROGRAM 2
PROGRAM 3
PROGRAM 4
WEEKEND
PROGRAM 1
PROGRAM 2
To Review The Current Temperature Setting:
■ Current time and temperature.
0* fC "lO
j* ij i U
i ao indicates (tie current setting of tne
thermostat is S0"F. 78 shows the
□ r esent room temperature as 7B r.
, □
Press for “
2 seconds *
or less:
nn mo
O u i_u
■ It held lor more man 5 cw 1 . ua,
will manually override your present
temperature to a new setting as
explained below.
NOTE:
i_ o ”< o
LH IU
■ bP will appear when moniior is m tne
“Manual” position and II you push either
D o r □ •
Manual Override of Program
Press S. hold □ to raise
temperature. _
Temporary Manual Override
Press &. hold □ to tower
temperature. _
In the following example, the present
room temperature is 82°F and we
want to lower the temperature tempo¬
rarily to 78°F until the next program.
X