HCC - Installing ICM Station Modules
The base model of HCC is supplied with an ICM-800 station output module. The capacity of the
controller is increased when new station modules are installed and recognized.
Standard ICM station modules are available in 4, 8, and 22 station sizes (ICM-400, ICM-800, ICM-
2200). These may be added at any time after initial installation.
Note: The ICM-2200 (22 Station module) must always be installed in the last two module slots to
make it compatible.
Model Max Station Count Total ICM 800 Modules Total ICM 2200 Modules
HCC-800-PL 38
Qty:2 - ICM-800 Qty:1 - ICM-2200
HCC-800-M 54
Qty:4 - ICM-800 Qty:1 - ICM-2200
HCC-800-SS 54
Qty:4 - ICM-800 Qty:1 - ICM-2200
To Next Page
Loading...
