offline mode.
ONLINE MODE
Change Wi-Fi/Check Status: Home>Settings>Wireless>Select a Setting to Modify
Controller Status: Home>Status>Controller Status
Program Expander: Home>Status>Expansion Modules
Manually Run Zone(s): Home>Zones>Select Zone> Run>Enter Time>OK
Model: Home>Status>Controller Status
Network Status: Home>Status>Network
Reboot Controller: Home>Settings>Config>Reboot Controller
Reset Controller: Home>Settings>Config>Factory Default
Run Wizard: Home>Settings>Run Wizard
Sensor Status: Home>Status>Sensor
Serial Number: Home>Status>Controller Status
Server Status: Home>Status>Controller Status
Test Network: Home>Status>Network>Test Network
Test Zone: Home>Status>Zone Tester
Time and Date: Home>Status>Time
Version Number: Home>Status>Controller Status
Zone Status: Home>Zones>Select Zone
OFFLINE MODE (Versions 3.33 and below)
Note: Changes can be done in offline mode only when Wi-Fi is disabled.
Adjust Time: Home>Settings>Offline Settings>Time
Disable Wi-Fi: Home>Settings>Offline Settings>Disable Wi-Fi
To Next Page
Loading...
