Pump Start Relay Operation per Station
When selecting a pump start relay to be on/off for an individual zone, you can edit the
zone in Zones and Schedules under Advanced Settings. This option is useful when one
zone is using city water and another is using water from a different source.
Note: This option is for HPC and HCC controllers only.
Follow the steps below to change this setting:
1. From the Zones and Schedules page, click on the icon on the zone you would like
to edit.
2. Click on Advanced, which is located on the top blue search section.
3. Select Use Global Master Valve Setting to keep this circuit on or select Disable
Master Valve to turn it off.
To Next Page
Loading...
