HC - Older Install Instructions
Controller Location
The Hydrawise controller is designed for installation in a protected location.
IMPORTANT: The chosen location must have Wi-Fi coverage. Wi-Fi coverage can be easily checked using an
iPhone or smartphone that has Wi-Fi connectivity, or on the Hydrawise unit itself (signal strength is shown when
you select a wireless name).
Cable Entry
The controller has two cable entry options: from the rear of the case, or via a conduit from
the bottom of the controller.
Entry from the rear of
controller
Using a sharp knife, remove the two cutouts on the rear of the controller as
indicated on the diagram in label 1.
Entry via 3/4 inch conduit
Using a sharp knife, cut around the semicircular line on the controller as
indicated on the diagram in label 2. Cut around the matching line on the blue
controller wiring cover.
Mounting the Controller
To Next Page
Loading...
