Hunter L451 - Page 20

For L45x lis without a FIA c
onsole (-PS models), operate PowerSlide as follows: Locate the “PowerSlide” switch alongside
the li controls. With the li at alignment height, unlock the slip plates by depressing PS buon. "Unlock" indicator will
glow as shown above. Depress PS buon again to lock the slip plates. For L45x lis with FAI console units (-IS models),
operate PowerSlide as follows: With the li at alignment height, press the image of the free slip plate or the locked slip
4-Post Lift Rack Models L451 & 454 Operations Manual
Page 20 of 28