Hunter Original - Fan Blade Assembly; Attaching Blades to Irons

11
1886
1886
Checking Oil
Ceiling fans work in two directions: downdraft
(counterclockwise rotation) and updraft (clockwise
rotation). To change the direction of air ow, turn the
fan off and let it come to a complete stop. Slide the
reversing switch to the opposite position. Restart the
fan. Move the directional lever down for down draft.
Move the directional lever up for up draft.
Attach the pull chain pendant to the fan pull chain.
The fan pull chain controls power to the fan. The pull
chain has four settings in sequence: High, Medium,
Low, and Off. Pull the chain slowly to change
settings. Release slowly to prevent the chain from
recoiling into the blades.
Fan Operation
Updraft (clockwise rotation)
creates a more indirect airow.
Updraft airow is great for moving
warm air downward.
Downdraft (counterclockwise
rotation) creates a direct breeze
and maximum cooling effect.
Check oil level immediately after lling the reservoir and every 1 to 5 years
thereafter. To check oil, bend an ordinary pipe cleaner into 1/2” long hook
and dip it into the oil reservoir.
If the oil touches the end of the pipe cleaner, the fan has ample oil. If it does
not touch, add SAE 10 non-detergent oil slowly until it touches the
pipe cleaner
1 2
STEP
STEP
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Operation Troubleshooting
Reverse
Switch
ON
Turn Power
Pipe
Cleaner
Pipe
Cleaner
1/2”
IMPORTANT
DO NOT TURN FAN ON UNTIL LUBRICATION HAS
BEEN ADDED. TO OPERATE THE FAN WITHOUT OIL
OR WITH LOW OIL WILL VOID YOUR WARRANTY.