Hunter Fan Company 41532-01 • 04/13/18
4
Installing Multiple Fans?
If you are installing more than one
fan, keep the blades and blade
irons in sets as they were shipped.
Getting Ready
To install a ceiling fan, be sure you can do the following:
• Locate the ceiling joist or other suitable support in ceiling.
• Drill holes for and install wood screws.
• Identify and connect electrical wires.
• Lift 70 lbs (31.8 kg) pounds.
If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer
or electrician.
Gathering the Tools
You will need the following tools for installing the fan:
• Adjustable wrench or pliers
• Electric drill with 11/64” bit
• #1 Phillips-head screwdriver (magnetic tip recommended)
• #2 Phillips-head screwdriver (magnetic tip recommended)
• Ladder (height dependent upon installation site)
• 11 mm socket wrench
Checking Your Fan Parts
Carefully unpack your fan to avoid damage to the fan parts. Refer to the included Parts Guide.
Check for any shipping damage to the motor or fan blades. If any parts are missing or damaged,
contact your Hunter dealer or call Hunter Technical Support Department at 1-888-830-1326.
To Next Page
Loading...
