Operation List
Photo/Video Playback
1. Slide the “Power Switch” to SETUP position to enter Test mode.
2. Press arrow button “▲” to enter Playback mode.
3. Press “◄” or “►” for selection, “OK” to play video.
4. Press button “▲” again to exit.
Delete files / Format SD Card
1. Slide the “Power Switch” to SETUP position to enter Test mode.
2. Press arrow button “▲” to enter Playback mode.
3. Press “MENU” button to delete files or format SD card.
Delete
a) Delete One – Press “OK” then use “◄” or “►” for selecting the file,
“Yes” to confirm or “No” to exit to previous page.
b) Delete All – Press “OK”, Yes” to confirm or “No” to exit to previous
page.
Format SD Card
a) Yes – Press “OK” then Yes” to confirm or “No” to exit to previous
page.
b) No – Press “OK” to exit to previous page.
4. Press “MENU” button to return to Playback mode.
5. Press button “▲” to exit.
Auto Power Off
In Test Mode, camera will automatically power off in 3 minutes if there is
no keypad touching. In this case turn it on manually if you want to do
some further configuration.
Note! The camera stays in “Test Mode” if the camera is on the menu
configuration pages.
To Next Page
Loading...