Auto – camera will automatically enter MMS & 4G setups when the SIM card
is inserted.
Manual – if "SIM Auto match failed, enter setup manually" pops up on screen,
switch “SIM Auto Match” to “Manual” mode, then enter MMS & 4G setups in
“Manual Setup”.
Enter setups below manually in “Manual” mode if your local operator cannot
be automatically matched by camera itself.
MMS – contact your operator for MMSC/ APN/ Proxy/ Port (Username &
Password if required) and enter this info manually.
Note!
● With MMS setups added, camera can send photos to preset phones/
emails. If MMS is with wrong information entered, then phones/ email
accounts will not be able to receive photos from camera.
● Email accounts receive photos from camera via SMTP only when SMTP is
ON and with correct SMTP info entered.
● Camera is not able to send pics to emails via MMS when SMTP is ON.
4G – Enter your local operator’s 4G APN, and corresponding Username and
Password.
Note!
● Only with 4G setups added, can SMTP and FTP functions work.
● It’s not a must to enter Username and Password of APN. But some
operators may require this password access to enable 4G function. For
details, contact your local operator.
You can simply choose to allow pics to be sent to your phone number via
MMS by switching the MMS function ON or OFF here.
MMS can only send small size pics to your phone number.
Default – camera comes with default SMTP setups; you only need to enter
receiving email address in “Send To”.
Manual – finish setups below if you would like to use your own SMTP server.
1. Enter your mailbox server IP, i.e.:
Hotmail IP: smtp.live.com
Gmail IP: smtp.gmail.com
2. Enter your mailbox port.
Port of most mailbox is 25; enter your mailbox corresponding port.
3. Enter your mailbox account and password access.
To Next Page
Loading...